| AMODEL® PPA DATA SHEETS FOR INJECTION MOLDING |
| Glass Fiber Reinforced |
| A-1133 HS: 33% glass fiber, general purpose, heat stabilized |
| A-1133 DW: 33% glass fiber, approved for potable water contact |
| A-6135 HN: 35% glass fiber, high flow, water-cooled molds, heat stabilized, not lubricated |
| A-6135 NL: 35% glass fiber, laser transmissive, high flow, water-cooled molds |
| AS-1133 HS: 33% glass fiber, structural for thicker walls, heat stabilized |
| A-1933 HSL BK328: 33% glass fiber, glycol resistant, heat stabilized, lubricated, black |
| AS-1933 HS: 33% glass fiber, structural for thicker walls, glycol resistant, heat stabilized |
| AS-4133 L: 33% glass fiber, structural for thicker walls, fast cycle time, water-cooled molds, lubricated |
| AS-4133 HS: 33% glass fiber, structural for thicker walls, fast cycle time, water-cooled molds, heat stabilized |
| HFZ A-4133 L: 33% glass fiber, high flow, fast cycle time, water-cooled molds, lubricated |
| A-1145 HS: 45% glass fiber, general purpose, heat stabilized |
| A-1145 DW: 45% glass fiber, approved for potable water contact |
| AS-1145 HS: 45% glass fiber, structural for thicker walls, heat stabilized |
| AS-1945 HS: 45% glass fiber, structural for thicker walls, glycol resistant, heat stabilized |
| A-1945 HSL BK328: 45% glass fiber, glycol resistant, heat stabilized, lubricated, black |
| AS-4145 HS: 45% glass fiber, structural for thicker walls, fast cycle time, water-cooled molds, heat stabilized |
| A-4160 HSL BK324: 60% glass fiber, highest modulus, fast cycle time, water-cooled molds, heat stabilized, lubricated, black |
| Toughened |
| AT-1002 HS: impact modified, ductile material, heat stabilized |
| ET-1000 HS: highly impact modified, heat stabilized |
| AT-6115 HS: 15% glass fiber, high flow, water-cooled molds, heat stabilized |
| AT-6130 HS: 30% glass fiber, high flow, water-cooled molds, heat stabilized |
| AT-1116 HS: 16% glass fiber, heat stabilized |
| AT-1125 HS: 25% glass fiber, heat stabilized |
| Flame Retardant |
| AFA-6133 V0 Z: 33% glass fiber, high flow, water-cooled molds |
| HFFR-4133: 33% glass fiber, halogen-free, fast cycle time, water-cooled molds |
| AFA-6145 V0 Z: 45% glass fiber, high flow, water-cooled molds |
| Mineral/Glass Fiber Reinforced |
| A-1565 HS: 65% mineral/glass fiber, heat stabilized |
| AS-1566 HS: 65% mineral/glass fiber, structural for thicker walls, heat stabilized |
| Conductive |
| A-1625 HS BK324: 25% carbon/glass fiber, ESD grade, heat stabilized, black |
| A-6625 HS BK324: 25% carbon/glass fiber, ESD grade, high flow, water-cooled molds, heat stabilized, black |
| Specialty Grades |
| AP-9240 NL: 40% mineral filled, impact modified, paintable |
| A-1130 FW: 30% glass fiber, internally lubricated, wear resistant |
| A-1133 NL WH505: 33% glass fiber, high-reflectivity white for LEDs |
| A-1133 NL WH886: 22% glass fiber, high-reflectivity white for LEDs |
| A-4122 NL WH905: 22% glass fiber, high-reflectivity white for LEDs, fast cycle time, water-cooled molds |
| A-4122 NL WH117: 22% glass fiber, high-reflectivity white for LEDs, fast cycle time, water-cooled molds |
|
A-4122 LS WH678: 22% glass fiber, high-reflectivity white for LEDs, fast cycle time, water-cooled molds, light stabilized
|
| A-4422 LS WH118: 22% mineral filled, high-reflectivity white for LEDs, fast cycle time, water-cooled molds, light stabilized |
|
| AMODEL® PPA DATA SHEET FOR EXTRUSION |
| EXT-1800: modified for extrusion |
|
