| AvaSpire® modified PEEK |
| Unreinforced AvaSpire Grades |
| AV-650: Better ductility, more cost effective than PEEK |
| AV-651: Better chemical resistance than AV-650 |
| AV-621: Low flow version of AV-651 |
| AV-722 BG 20: Cost effective, low moisture, good barrier |
| Reinforced Grades |
| AV-621 GF30: AV-621 with 30% Glass fiber |
| AV-621 CF30: AV-621 with 30% Carbon Fiber |
| AV-650 GF30: AV-650 with 30% Glass fiber |
| AV-651 GF30: AV-651 with 30% Glass fiber |
| AV-651 CF30: AV-651 with 30% Carbon fiber |
| AV-722 CF30: High stiffness, cost effective 30% Carbon Fiber |
| AV-750 GF40: High stiffness, cost effective, 40% Glass fiber |
| Wear Resistant Grades |
| AV-722 SL30: Lower flow, good wear resistance in lubed or non-lubed, cost effective |
| AV-742 SL30: Higher flow, good wear resistance in lubed or non-lubed, cost effective |
| AV-755 SL45: Very good wear resistance, lubricated, more cost effective than PEEK |
| |
| Torlon® polyamide-imide |
| High-Strength Torlon PAI Grades |
| 4000T: Unfilled, powder form |
| 4203L: General purpose, unfilled |
| 5030: Glass fiber, high stiffness, very low creep |
| 7130: Carbon fiber, very high stiffness, excellent fatigue resistance |
| Wear-Resistant Torlon PAI Grades |
| 4275: Designed for high speeds |
| 4301: General purpose, high compressive strength |
| 4435: Designed for high PVs |
| 4630: Exceptional wear resistance, dry |
| 4645: Exceptional wear resistance, lubricated |
| Specialty Torlon PAI Molding Grade |
| 4601: Designed for undercut tooling such as deep groove bearings |
| PAI Powders for Coatings and Adhesives |
| AI-10 LM: Low residual monomer |
| PAI Powders for Coatings and Adhesives: |
|
