|
|
| |
|
|
|
 |
|
Sulfone Polymers Data Sheets |
|
|
|
|
|
|
|
|
|
|
| Radel polyphenylsulfone (PPSU) |
| Unfilled Radel R PPSU |
| R-5000: Transparent, general purpose for injection molding |
| R-5100: Opaque colors |
| R-5500: Transparent, low flow for extrusion |
| R-5800: Transparent, high flow for injection molding |
| R-5900: Transparent, internally lubricated, high flow for injection molding |
| Glass Filled Radel R PPSU |
| RG-5030: 30% Glass fiber reinforced |
| Radel R PPSU Aircraft Grades |
| R-7300, R-7400: Colorable, high flow, for injection molding |
| R-7535: Opaque, medium flow for injection molding, darker colors |
| R-7558: Opaque, medium flow for injection molding, light colors |
| R-7700: Deep-draw sheet for thermoforming |
|
| polyethersulfone (PESU) |
| Click here to view obsolete grades (Effective August 1, 2008) |
| Unfilled PESU Pellets |
| Radel A-201: Transparent, medium flow for extrusion or injection molding |
| Gafone 3200: Transparent, medium flow for extrusion or injection molding |
| Radel A-301: Transparent, high flow, general purpose for injection molding |
| Gafone 3300: Transparent, high flow, general purpose for injection molding |
| Gafone 3400: Higher flow, general purpose for injection molding |
| Gafone 3500: Higher flow, general purpose for injection molding |
| Gafone 3600: Highest flow, general purpose for injection molding |
| Radel A-702: Highest flow, general purpose for injection molding |
| Glass Filled PESU Pellets |
| Radel AG-320: 20% Glass fiber reinforced |
| Radel AG-330: 30% Glass fiber reinforced |
| Gafone 3320GF: 20% Glass fiber reinforced |
| Gafone 3330GF: 30% Glass fiber reinforced |
PESU Powders |
| Udel polysulfone (PSU) |
| Unfilled Udel PSU |
| P-1700 NT: Transparent, general purpose for injection molding |
| P-1700 NT LCD: Membrane grade |
| P-1710: Opaque, general purpose for injection molding |
| P-1720: Flame retardant, opaque |
| P-1800: Powdered form of P-1700 |
| P-1835: Powdered form of P-3500 |
| P-3500 NT LCD: Transparent, low flow, extrusion & hollow-fiber membranes |
| P-3703: Transparent, high flow |
| Glass Filled Udel PSU |
| GF-110: 10% Glass fiber reinforced |
| GF-120: 20% Glass fiber reinforced |
| GF-130: 30% Glass fiber reinforced |
|
| Mindel modified polysulfone (PSU) |
| B-322: Glass fiber reinforced, V-0, good electrical properties |
| B-430: 30% Glass fiber reinforced, low warpage, flame resistant |
|
|
| Acudel modified polyphenylsulfone (PPSU) |
| 22000: Modified polyphenylsulfone |
| 79000: Aircraft grade, toughened, low flow grade for extrusion |
|
|
|
|
|
|
|
|
|
|
|
|
