|
|
|
|
|
Press Releases from Solvay Advanced Polymers. |
|
|
14 July 2010
Solvay Partners With Entegris on New Carbon Nanotube-Enhanced PEEK Products
Solvay Advanced Polymers is partnering with Entegris Inc.’s TEGO Polymers unit to develop and market advanced carbon nanotube-enhanced PEEK products suited for a range of emerging applications in the medical, aerospace, automotive, and oil and gas industries. Solvay will supply its KetaSpire® PEEK resin to Entegris who in turn will sell compounds utilizing its novel carbon nanotube technology (CNT).
|
|
|
30 June 2010
GMD Inc. Launches First Reusable Trocar with Thermoplastic Handle, Reduces Cost by 75 Percent
GMD Inc. of Gig Harbor, Washington, has introduced the medical industry’s first reusable trocar with a thermoplastic handle. The company selected 20% glass-filled Udel® polysulfone for its strong chemical resistance, low shrinkage and excellent autoclave resistance (a minimum of 50 cycles). The plastic-handled trocar reduces cost by 75% over the previous all-metal version.
|
|
 |
13 May 2010
Marine Signal Lantern Features Turret Made of KetaSpire® PEEK
The TF-3B MicroPower OMNIBUS® II Flasher/Lampchanger from Tideland Signal Corp., Houston, features a turret made of 30% glass-filled KetaSpire® PEEK resin for high-heat resistance and exceptional dimensional stability. The solid-state flasher and six-place lampchanger is an integral component in Tideland Signal’s marine signal lanterns which are used for navigational purposes at ports and harbors throughout the world.
|
|
 |
21 April 2010
AvaSpire® Modified PEEK to Replace Standard PEEK in Compressor Valve Plates
AvaSpire® modified PEEK will replace standard PEEK in compressor valve plates at a northern Wyoming gas processing plant. The material switch follows a 14-month test and evaluation during which AvaSpire valve plates earned high marks in terms of performance with no problems or failures.
|
|
|
7 April 2010
Solvay Advanced Polymers has selected Ashland Distribution as the sole authorized distributor for Amodel® polyphthalamide (PPA) resins in North America.
Effective May 1, Ashland will become the North American distributor for a core group of Amodel grades in the U.S., Mexico, Canada, and Puerto Rico. These 21 workhorse materials consist of glass-reinforced, glass/mineral-filled, toughened, flame-retardant, and structural grades for injection molding uses. |
|
 |
31 March 2010
Plating Ring Made of KetaSpire® PEEK Delivers Strong Chemical Resistance and Dimensional Stability
A partial plating ring from Link Upon Advanced Material Corp., Taipei, Taiwan, is made of KetaSpire® PEEK for strong chemical resistance, high heat deflection temperature, low creep, and exceptional dimensional.
|
|
 |
17 February 2010
Low-Profile Side View LED Made of Amodel® PPA Is the Industry's Thinnest
Japanese molder Nissei Industries Ltd. has produced the industry’s thinnest low-profile side view light-emitting diode (LED) for use on thin-profile mobile phones. The 0.4-mm-high LED made of Amodel® A-4422 LS WH118 polyphthalamide (PPA) resin from Solvay Advanced Polymers sets a new mark for side view LEDs, which until now have been limited to 0.5 mm to 0.8 mm in size.
|
|
|
14 December 2009
Solvay Launches Wear-Resistant Grades of KetaSpire® PEEK and AvaSpire® Modified PEEK
Solvay Advanced Polymers introduces five new wear-resistant grades of KetaSpire® polyetheretherketone (PEEK) and AvaSpire® modified PEEK. These formulations provide an effective all-plastic alternative to more complex metal-based designs with rolling components for high-temperature friction and wear applications in lubricated and non-lubricated environments. |
|
|
4 November 2009
Sensor Housings Made of KetaSpire® PEEK Offer Excellent Heat and Chemical Resistance
New high-performance industrial sensors manufactured by Advanced Sensor Technologies Inc., Orange, Calif., feature a housing made of Solvay's unreinforced KetaSpire® KT-880 NT PEEK. The thermoplastic housing meets the harsh operating conditions found in process control measurement and monitoring applications in chemical manufacturing, environmental control, mining, pulp and paper, and wastewater, as well as food and dairy industries. |
|
|
14 October 2009
Britek SA's Transducer Housings Are Made from 2-Inch-Diameter Rod of KetaSpire® PEEK
New ultrasound transducer housings from Britek SA, Inc., San Antonio, Texas, are made of large-diameter, 30% carbon fiber-reinforced polyetheretherketone (PEEK) rod from Drake Plastics Ltd. Co., Cypress, Texas, for high strength and outstanding heat and chemical resistance. The 2-inch diameter rod, made of Solvay's KetaSpire® KT-820 CF30 PEEK resists cracking due to the material’s high elongation and toughness. Ultrasound transducer housings made of PEEK rod withstand the harsh operating conditions found in inspection tools used to detect flaws and cracks in pipelines used in the petrochemical industry. |
|
|
23 September 2009
AdDent's Composite Dispenser Gun Made of Radel® R Polyphenylsulfone is One of the First Autoclavable Plastic Units
AdDent, Inc., a leading manufacturer of dental instruments and devices, has introduced its first composite dispenser gun – an ergonomic and easy-to use device that features Radel® R polyphenylsulfone for autoclavability, strong chemical resistance and high strength.
|
|
|
30 July 2009
Labyrinth Seals of Torlon® PAI Offer Greater Reliability & Efficiency Than Aluminum in Centrifugal Compressors
Turbo Components & Engineering Inc., Houston, Texas, an after-market manufacturer of babbitted bearings and labyrinth seals, replaces traditional labyrinth seals made of aluminum with those made of Torlon® polyamide-imide (PAI) from Solvay Advanced Polymers. The ultra-performance plastic seals are said to offer greater reliability, increased efficiency, and longer run times over OEM-supplied aluminum seals in a range of centrifugal compressors for oil refining, chemical processing, and power generation markets. |
|
|
22 June 2009
MRI Assembly Utilizes AvaSpire® Modified PEEK For Rigidity and Chemical Resistance
Invivo Corp.’s new Luminescence Breast System (LBS), an MRI system for diagnostic imaging and biopsy, features an immobilization system that includes several integral parts made of AvaSpire® AV-651 modified PEEK that are molded by Nicolet Plastics, Inc. |
|
|
22 June 2009
Next-Generation Torlon® PAI Materials Deliver Significantly Improved Wear Resistance
Solvay Advanced Polymers has launched a pair of new wear-resistant Torlon® polyamide-imide (PAI) grades that deliver significantly better wear performance than other available Torlon wear-resistant materials. |
|
|
20 May 2009
China Array Plastics Certified as Injection Molder of Solvay Advanced Polymers' Torlon® PAI
Solvay Advanced Polymers announced today that China Array Plastics has been added as a certified injection molder of the company’s Torlon® polyamide-imide (PAI) resin in China. China Array, based in Pittsfield, Mass., will mold a range of high-performance products for the automotive, oil and gas, and industrial markets at its 15,000-sq-ft facility in Wuhan, China. |
|
|
4 May 2009
Solvay Advanced Polymers' Udel® Polysulfone Is Chosen For Tigre's New Hot Water Fittings
Tigre SA, the largest plumbing manufacturer in Brazil, has developed the first complete line of plastic pipe fittings for pressurized, flexible hot water systems in Brazil. The fittings are made of Udel® polysulfone from Solvay Advanced Polymers, a tough, hydrolytically stable material suitable for applications requiring continuous exposure to hot chlorinated water.
|
|
|
21 April 2009
Solvay Advanced Polymers Unveils AvaSpire® AV-700 Series as Lower-Cost Alternative to PEEK
Solvay Advanced Polymers has launched the AvaSpire® AV-700 series, a new line of modified PEEK grades that fill the cost/performance gap between high-performance crystalline polymers (PPS, LCP, and high-temperature nylon) and PEEK. |
|
|
6 April 2009
Solvay Advanced Polymers announced today that Advanced Polymer Technologies is offering large stock shapes of Spire® Ultra Polymers.
The new stock shapes give designers the ability to create very large machined parts while holding tight tolerances.
|
|
|
31 March 2009
Solvay Advanced Polymers' Family of Spire® Ultra Polymers Penetrates Aerospace Industry
The company’s broad portfolio of ultra-performance polymers, which includes Torlon® polyamide-imide (PAI), KetaSpire® polyetheretherketone (PEEK), AvaSpire® modified PEEK, and PrimoSpire® self-reinforced polyphenylene (SRP), are making
strong inroads in demanding aerospace applications such as hardware, fasteners, and mechanical components. |
|
|
31 March 2009
Solvay Advanced Polymers' Radel® R PPSU Replaces Aluminum in New Recyclable Airline Catering Trolley
The airline industry’s first recyclable catering trolley with a virtually all-plastic design was introduced by AeroCat B.V., Tilburg, the Netherlands, at the Aircraft Interiors Expo here March 31-April 2. The innovative Tigris trolley, made of injection and extrusion grades of Radel® R polyphenylsulfone (PPSU) resin from Solvay Advanced Polymers, LLC, weighs just 17 kg (37 lb) and is claimed to be the lightest in the industry. |
|
|
24 March 2009
Solvay Advanced Polymers' Greenville, SC Plant Achieves ISO/TS 16949 Registration
Solvay Advanced Polymers, LLC, announced today that its Greenville, S.C. plant has earned ISO/TS 16949 registration – the automotive industry’s top quality management system standard for suppliers. At the South Carolina plant, the company manufactures a full range of Torlon® polyamide-imide |
|
|
25 February 2009
Solvay Advanced Polymers Introduces Stock Shapes of Zeniva™ PEEK for Use in Implantable Medical Devices
Solvay Advanced Polymers, LLC, has launched a range of stock shapes made of Zeniva PEEK (polyetheretherketone), one of four polymers that comprise the company’s family of Solviva™ Biomaterials being offered for use in implantable medical devices |
|
|
10 February 2009
Solvay Advanced Polymers’ KetaSpire® PEEK and AvaSpire® Modified PEEK Achieve ISO 10993 Biocompatibility
Industry’s First Vibrantly Colored PEEK-Based Resins Give Medical OEMs and Healthcare Professionals Unique Benefits |
|
|
9 February 2009
Stock shapes of Spire® Ultra Polymers available through Piper Plastics
Proprietary technology produces thick, cost-effective stock shapes with injection molded properties, faster cycle times |
|
|
12 November 2008
Solvay Advanced Polymers Announces Hot Potable Water Certifications for Amodel® PPA Resins
Solvay Advanced Polymers, makers of more plastics with more performance, announced today that the company has obtained hot potable water certification for two grades
|
|
|
22 September 2008
Radel® R Polyphenylsulfone from Solvay Advanced Polymers Specified for Interior Panels on New Bombardier FLEXITY Swift U5-25 Railcars for Frankfurt U-Bahn
Solvay Advanced Polymers, makers of more plastics with more performance, announced today that Radel® R-7700 polyphenylsulfone is being used in thermoformed interior panels in the new Bombardier FLEXITY Swift U5-25 railcars
|
|
|
23 June 2008
EPIC Polymers and Solvay Advanced Polymers announce strategic agreement
Epic Polymers and Solvay Advanced Polymers have completed a strategic agreement for Epic to market KetaSpire® PEEK and AvaSpire® modified PEEK into Germany and France |
|
|
12 May 2008
B. Bigler inks agreement with Solvay Advanced Polymers to distribute KetaSpire® PEEK and
AvaSpire® modified PEEK
Solvay Advanced Polymers, makers of more plastics with more performance, signed a non-exclusive distribution partnership with leading Swiss material supplier, B. Bigler AG of Zug, Switzerland
|
|
|
21 April 2008
Solvay Advanced Polymers Commissions New PEEK Plant in India
New commercial facility comes on stream in Panoli, India
|
|
|
2 April 2008
Solvay Introduces Ixef® Polyarylamide Gamma-Stabilized Colors
New grade helps convert reusable instruments into single-use as hospitals seek to lower costs and risk of transfer of infections
|
|
|
5 March 2008
HEBU Medical’s Neuroline™ spinal curettes reduce weight with enhanced ergonomic comfort
Molding partner Minnesota Rubber & Plastics turns to Radel® R plastic from Solvay Advanced Polymers for exceptional chemical resistance and strength
|
|
|
9 January 2008
Solvay Advanced Polymers names Corbin as new President & CEO
George Corbin, Vice President of Technology, has been named President & CEO, succeeding Roger Kearns, who will move on to a senior leadership position within the Solvay group.
|
|
|
7 November 2007
Solvay Advanced Polymers works with W. Müller to perfect head design for new Ixef® polyarylamide for multi-layer fuel barrier construction
New dual- and tri-layer system helps OEMs meet PZEV and CARB emission standards without the multiple layers required in other options like EVOH |
|
|
29 October 2007
Solvay Advanced Polymers completes first phase of major sulfone polymers expansion plan
Combined investments made by industry leader to total more than $100 million |
|
|
24 October 2007
Solvay Advanced Polymers launches Solviva™ Biomaterials available for use in implantable medical devices
No other supplier has more polymers available for use in implantable applications than Solvay Advanced Polymers. |
|
|
9 October 2007
Midwest Mold designs better performing, lower-cost water baffle made of Amodel® PPA plastic
New design revolutionizes injection mold cooling for quicker cycle times while lowering material tool costs
|
|
|
3 October 2007
New high flow and reflective grades of Amodel® PPA
Expanded offerings deliver new options for LED OEMs and consumer electronics designers
|
|
|
14 August 2007
Ajedium Film Group to supply KetaSpire™ PEEK and AvaSpire™ modified PEEK films
Solvay Advanced Polymers announced today that it has teamed with premier film processor, Ajedium Film Group, to offer KetaSpire™ PEEK and AvaSpire™ modified PEEK in film form.
|
|
|
13 June 2007
B/E Aerospace teams with Solvay Advanced Polymers for new video display bezel on select Emirates’ aircraft
Radel® R polyphenylsulfone delivers exceptional processing and aesthetics while also meeting stringent FAA regulatory requirements
|
|
|
7 May 2007
Solvay Advanced Polymers launches newly enhanced, full line of high-temperature, wear-resistant plastics
Leveraging portfolio of high- and ultra-performance polymers, Solvay debuts specifically formulated grades designed for dry and lubricated environments
|
|
|
18 April 2007
Bemis Chooses Ixef® Plastic from Solvay Advanced Polymers for Co-injection Molding
Polyarylamide polymer delivers finish necessary for Class A painted surface plus the equivalent strength of die-cast metal with the ease of plastics fabrication
|
|
|
2 March 2007
Solvay Advanced Polymers unveils newly formulated Ixef® polyarylamide barrier material for automotive fuel systems
New dual-layer system helps OEMs meet PZEV and CARB emission standards without the multiple layers required in other options like EVOH
|
|
|
24 October 2006
Textron Fastening Systems Turns to Solvay Advanced Polymers to Supply Performance Plastic for New Sealed Rivetless Nut Plate
New version of Cherry® Rivetless Nut Plate now provides fluid protection while containing chemical-resistant washer made of Amodel® PPA
|
|
|
16 October 2006
SOLVAY Expands, Upgrades Ultra Polymer Production in Panoli (India)
Launch of KetaSpire®, a new polyether ether ketone (PEEK) product line
|
|
|
16 October 2006
Solvay Advanced Polymers Unveils KetaSpire™ PEEK
New PEEK product employs nucleophilic chemistry, yielding equivalent performance and processability to industry’s leading offering
|
|
|
16 October 2006
Solvay Advanced Polymers Unveils the SolvaSpire™ Family of Ultra-Performance Polymers
Broad product portfolio includes some of the highest performing plastics in categories ranging from heat and chemical resistance to stiffness and strength under load
|
|
|
9 August 2006
Solvay Advanced Polymers and Magee Plastics team up to create aviation's first-of-its-kind plastics aftermarket for aircraft interiors
Partnership delivers for Delta Air Lines with FAA-approved and PMA-certified high performance plastic replacement parts
|
|
|
15 May 2006
Solvay Completes Acquisition of Gharda After Mississippi Polymer Technologies: Expansion into Ultra-High Performance Polymers in India & U.S.
PEEK and Parmax® to Enhance Solvay Advanced Polymers' Ultra Polymers Product Line
|
|
|
30 March 2006
Two new materials present new options for highly reflective, directly metallized automotive lighting applications
UDEL® LTG-2000 polysulfone for temperatures up to 175 °C;
RADEL® LTG-3000 polyethersulfone for temperatures up to 205 °C
|
|
|
22 March 2006
RADEL® R Polyphenylsulfone Helps More Orthopedic OEMs Customize Their Look With Color
Custom colors now available in smaller quantities with shorter lead times/font>
|
|
|
28 February 2006
Solvay Advanced Polymers Announces Distribution Agreement with Modern Plastics
Partnership increases availability of RADEL® R polyphenylsulfone to medical industry in North America
|
|
|
13 February 2006
Solvay Advanced Polymers Finalizes Acquisition of Mississippi Polymer Technologies
Plastics company expands range of ultra-performance polymers with PARMAX®
|
|
|
10 January 2006
Solvay to Boost Ultra Performance Polymer Portfolio with Acquisition of Mississippi Polymer Technologies
Solvay expands its specialty polymer range with PARMAX®
|
|
|
15 December 2005
Augusta Manufacturing Plant Earns OSHA 'Star' Award for Health and Safety Excellence
The manufacturing facility in Augusta, Ga., has been named an OSHA Voluntary Protection Program (VPP) “Star” site by the U.S. Department of Labor.
|
|
|
15 December 2005
SOLVAY Signs Agreement to Acquire Innovative Specialty Polymers Business from GHARDA (India)
New R&D, manufacturing unit in India for global development and production of innovative materials
|
|
|
18 November 2005
Solvay Advanced Polymers Introduces Low-Warp IXEF® 2060 Polyarylamide
This 55% glass-reinforced material offers low warpage, improved vibration resistance, and excellent surface finish.
|
|
|
30 August 2005
Solvay Advanced Polymers Selects Plant Site in Marietta, Ohio for New Sulfone Polymers Production Unit
New facility will nearly triple polyethersulfone capacity
|
|
|
6 June 2005
RADEL® R Polyphenylsulfone Chosen by Premier Dental Products Company for Patient Friendly PerioWise Dental Probe
Plastic flexible tipped color-coded periodontal probe easier to use and more comfortable for patients than conventional metal probes
|
|
|
2 May 2005
AMODEL® PPA Helps Commercial Laundry Manufacturer Pump Up Performance
Water impeller made from high-strength aromatic nylon helps washing machines work harder, longer
|
|
|
14 April 2005
Solvay Advanced Polymers Selects Shaw Stone & Webster To Provide Front End Engineering Design For $50 Million Sulfone Polymers Production Unit
New facility will nearly triple polyethersulfone (PES) capacity
|
|
|
28 March 2005
IXEF® Polyarylamide Improves Performance and Lowers Cost of Structural Applications Using Gas Assist Injection Molding
New combination of product and process delivers metal-like performance with durable high gloss surface finish
|
|
|
8 March 2005
RADEL® R Polyphenylsulfone Chosen by Premier Dental Products Company for New Ergonomically Designed Dental Scaling Instrument
Big Easy™ Ultralite™ combines the lightness and durability of a solid resin handle with a silicone grip for superior comfort and control
|
|
|
Archived Press Releases for 2003-2004 |
|
|
Archived Press Releases for 2001-2002 |
